仿真计算机和仿真软件发展

介绍仿真机和仿真软件的发展,分析了银河仿真机系统性能,探讨了仿真机的未来发展特征。     

亚音速飞行目标气动噪声方位角估计技术

亚音速飞行弹道气动声源是宽带非平稳噪声。提出基于小波函数的波达方向估计算法,并采用时频分析方法进行特征分析,获取气动噪声显著目标特性。通过优化时间-空间谱特征,对在时频域空间谱的目标信号进行优化,从而增强目标信号在空间谱上的显著性,最终有效实现亚音速飞行弹道气动声源的角度估计。实验数据验证表明,基于时频分析阵列信号处理模型,可以更好地实现亚音速飞行目标气动噪声方位角估计。     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

Fullerene bisadduct stabilizers: The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose (NC)/nitroglycerine (NG), we synthesized N-(4-methoxy) phenylpyrrolidine-C₆₀ and four different of bis(N-(4-methoxy) phenylpyrrolidine)-C₆₀ compounds through Prato reaction. Their structures were characterized by UV–vis, ¹H NMR, ¹³C NMR, high-resolution mass spectroscopy, and single-crystal X-ray diffraction. Their stabilization effect to NC/NG were investigated using differential scanning calorimetry, methyl violet, vacuum stabilization effect, weight loss, and accelerating rate calorimeter tests. The results indicated these compounds had excellent stabilization effect to NC/NG. The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C₆₀. Moreover, the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different, and its stabilization effect to NC is also different. The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows: e-edge > trans-2> cis-2> trans-3. Electron paramagnetic resonance (EPR) and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG. The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide, and their ability is better than that of the monoadduct and C₆₀, which is consistent with the results of stabilization effect performance test.     

关于加强“4＋1”模式学员军事素质基础培养的研究

现代战争对军人的军事素质提出了更高的要求,而优良的军事素质,是靠平时严格、艰苦的训练来实现的.我院高度重视培养提高学员的军事素质,主要通过3个途径实现培养目标.这里重点阐述了我院对学员军事素质培养的实践经验及效果,对军事工程院校学员军事素质基础的提高,具有一定的指导作用和参考价值.     

PS／2键盘接口在单片机中的应用研究

PS/2键盘接口由于采用标准PS/2协议通信,易于控制,在嵌入式系统中有良好的应用前景.针对如何使用这种接口,介绍了其物理接口及通信协议,重点对工作时序和部分命令字进行了说明.在应用中,给出了PS/2键盘与单片机的接口电路及通信方案,并提供相应的接口通信程序.     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Performance analysis of queue length monitoring of M/G/1 systems

This study investigates the statistical process control application for monitoring queue length data in M/G/1 systems. Specifically, we studied the average run length (ARL) characteristics of two different control charts for detecting changes in system utilization. First, the nL chart monitors the sums of successive queue length samples by subgrouping individual observations with sample size n. Next is the individual chart with a warning zone whose control scheme is specified by two pairs of parameters, (upper control limit, d_u) and (lower control limit, d_l), as proposed by Bhat and Rao (Oper Res 20 (1972) 955–966). We will present approaches to calculate ARL for the two types of control charts using the Markov chain formulation and also investigate the effects of parameters of the control charts to provide useful design guidelines for better performance. Extensive numerical results are included for illustration. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

加强三维制图教学 促进部队装备建设

为了提高武警部队装备研发的设计速度与水平,从满足部队装备建设的实际需要出发,阐述了军事装备学科的发展思路与方向。结合部队装备仿真设计和创新研制实例,简述了实体参数化设计软件Pro／Engineer的功能特点,阐明了加强三维制图教学的必要性及其在部队装备建设中的重要作用,以及不同学历层次Pro／Engineer的教学内容。对促进军事装备学本科与研究生教育,提高部队装备的开发建设水平具有意义。